October 22, 2022
1. High precision: the positioning accuracy is 0.05mm, and the repeat positioning accuracy is 0.02mm.
2. The slit is narrow: the laser beam is focused into a small spot, so that the focus reaches a high power density, and the material is quickly heated to the degree of vaporization, which evaporates to form holes. As the beam moves linearly relative to the material, the holes are continuously formed into narrow slits. The width of the incision is generally 0.10 to 0.20 mm.
3. The cutting surface is smooth: there is no burr on the cutting surface, and the surface roughness of the incision is generally controlled within Ra12.5.
4. Fast speed: the cutting speed can reach 10m/min, and the positioning speed can reach 70m/min, which is much faster than the wire cutting speed.
5. Good cutting quality: non-contact cutting, the cutting edge is less affected by heat, there is basically no thermal deformation of the workpiece, and the slump formed when the material is punched and sheared is completely avoided, and the cutting seam generally does not require secondary processing.
6. No damage to the workpiece: The laser cutting head will not contact the surface of the material to ensure that the workpiece will not be scratched.
7. Not affected by the hardness of the material to be cut: The laser can process steel plates, stainless steel, aluminum alloy plates, hard alloys, etc., no matter what kind of hardness, it can be cut without deformation.
8. Not affected by the shape of the workpiece: the laser processing has good flexibility, can process any graphics, and can cut pipes and other special-shaped materials.
9. Non-metals can be cut and processed: such as plastic, wood, PVC, leather, textiles, plexiglass, etc. 10. Save mold investment: laser processing does not require molds, no mold consumption, no need to repair molds, save time for mold replacement, thereby saving processing costs and reducing production costs, especially for the processing of large products.
11. Material saving: Using computer programming, products of different shapes can be cut out of the entire board material to maximize the utilization rate of materials.
12. Improve the speed of new product development: After the product drawing is formed, laser processing can be carried out immediately, and the physical object of the new product can be obtained in the shortest time.
